Both Launch X431 IMMO series (IMMO Plus / IMMO Elite/ IMMO PAD / IMMO Pro) and X431 PAD series tablets (PAD V, PAD VII, PAD9 LINK) support BMW G chassis BDC2 key adding. The X431 X-Prog3 and MCU3 Adapter are required to work with the X431 tool.
VAPON VP100 key programmer newly added BMW BDC2 module cloning function. Now it can add new key, erase IMMO data and clone for BMW BDC2 module.
Launch X431 has expanded the ECU Flash function for X431 PAD V LINK HD, PRO3 SE HD, PRO3 LINK HD (V+ SmartLink HD), PRO3S+ SmartLink HD, and other PRO3 series tablets to read and write heavy-duty truck ECUs.
Launch X431 updated ID48 96-bit transponder copy/clone function for X431 IMMO/X431 PAD/X431 PRO/CRP919 BT series tablets with X431 Key Programmer on July 16, 2025.
OBDSTAR C4-07 (MB-VGS4-0-NAG2) Adapter Kit can be used to work with X300 Classic G3 (Key Master G3) and DC706 ECU Tool, etc for all Mercedes-Benz FBS4/DAS4 generation with VGS4-0 NAG2 7G-Tronic TCU.
Today we will explain how to install the GM driver and connect the Topdon RLink X7, Rlink Lite and RLink J2534 to GM Techline Connect software.
When using the APPRO2 programmer to reset the mileage on BMW F/G series vehicles, the system will prompt for a check code.
CGDI A2 released a new update (V018). It added Anti-theft Matching function for Volkswagen NEC+95320_873B (H51/H52), etc. Upgrade your tool now to unlock the new functionalities and car models.
A major upgrade to the 48-copy server for the CGDI K2 Smart Key Tool! The service is now version V1.2, delivering twice the calculation speed for faster and smoother operations.
How to erase crash/reset SRS or repair this airbag module? OBDSTAR P50 or CG70 for this airbag? Here is the clue.
The MD1CS002 (used in BMW G-series vehicles post-2020) employs advanced hardware encryption. Direct cloning is impossible without unlocking
Xhorse VVDI2 V7.5.0 Update on June 23th, 2025: Suport add key function for BMW G-Series BDC2 type, require firmware V7.5.0.
