Search Products

OBDSTAR G3 Query VW MQB Historical IMMO Data

OBDSTAR G3 Query VW MQB Historical IMMO Data

In this post, we’ll demonstrate how to use OBDSTAR X300 Classic G3 to query historical IMMO data and read ECU info for Volkswagen MQB dashboard.

How to Add BMW BDC2 Key by Launch X431 IMMO Tablet on Bench?

How to Add BMW BDC2 Key by Launch X431 IMMO Tablet on Bench?

Both Launch X431 IMMO series (IMMO Plus / IMMO Elite/ IMMO PAD / IMMO Pro) and X431 PAD series tablets (PAD V, PAD VII, PAD9 LINK) support BMW G chassis BDC2 key adding. The X431 X-Prog3 and MCU3 Adapter are required to work with the X431 tool.

How to Purchase and Configure Launch X431 ECU Flash Function?

How to Purchase and Configure Launch X431 ECU Flash Function?

Launch X431 has expanded the ECU Flash function for X431 PAD V LINK HD, PRO3 SE HD, PRO3 LINK HD (V+ SmartLink HD), PRO3S+ SmartLink HD, and other PRO3 series tablets to read and write heavy-duty truck ECUs.

How to Clone ID48 96-Bit Chip by Launch X431 Tool?

How to Clone ID48 96-Bit Chip by Launch X431 Tool?

Launch X431 updated ID48 96-bit transponder copy/clone function for X431 IMMO/X431 PAD/X431 PRO/CRP919 BT series tablets with X431 Key Programmer on July 16, 2025.

OBDSTAR C4-07 (MB-VGS4-0-NAG2) Adapter Kit: Solder-free Virgin for Benz FBS4 TCM

OBDSTAR C4-07 (MB-VGS4-0-NAG2) Adapter Kit: Solder-free Virgin for Benz FBS4 TCM

OBDSTAR C4-07 (MB-VGS4-0-NAG2) Adapter Kit can be used to work with X300 Classic G3 (Key Master G3) and DC706 ECU Tool, etc for all Mercedes-Benz FBS4/DAS4 generation with VGS4-0 NAG2 7G-Tronic TCU.

Topdon RLink J2534 and GM Techline Connect SPS2 Connection Guide

Topdon RLink J2534 and GM Techline Connect SPS2 Connection Guide

Today we will explain how to install the GM driver and connect the Topdon RLink X7, Rlink Lite and RLink J2534 to GM Techline Connect software.

How to get APPRO2 Check Code Automatically?

How to get APPRO2 Check Code Automatically?

When using the APPRO2 programmer to reset the mileage on BMW F/G series vehicles, the system will prompt for a check code.

Reset Tesla Model 3/Y Airbag 1512876-00-E by OBDSTAR or CG70

Reset Tesla Model 3/Y Airbag 1512876-00-E by OBDSTAR or CG70

How to erase crash/reset SRS or repair this airbag module? OBDSTAR P50 or CG70 for this airbag? Here is the clue.

How to Clone BMW MD1CS002 ECU with CG FC200?

How to Clone BMW MD1CS002 ECU with CG FC200?

The MD1CS002 (used in BMW G-series vehicles post-2020) employs advanced hardware encryption. Direct cloning is impossible without unlocking

Programming CGDI ESL Emulator Using Xhorse KTP Key Tool Plus Pad for Mercedes-Benz W204

Programming CGDI ESL Emulator Using Xhorse KTP Key Tool Plus Pad for Mercedes-Benz W204

In this article, we briefly explain the process of programming the CGDI ESL emulator for the Mercedes-Benz C200 W204. The process is similar to programming emulators from other manufacturers, including the older versions of VVDI.

OBDSTAR G3 Adds New Key to 2020 Renault Captur

OBDSTAR G3 Adds New Key to 2020 Renault Captur

Adding a new smart key card to a Renault Captur 2020 using the OBDSTAR X300 Classic G3 tool is a detailed process that requires careful execution. Below is a step-by-step guide based on a real-world procedure, including important tips during the process.

How to Setup Topdon Rlink J2534 for Nissan OEM Software?

How to Setup Topdon Rlink J2534 for Nissan OEM Software?

Topdon Rlink X7/Rlink J2534 is perfectly compatible with Nissan Consult3 plus software. Nissan recommends this product and it is affordable.