OBDSTAR C4-07 (MB-VGS4-0-NAG2) Adapter Kit: Solder-free Virgin for Benz FBS4 TCM

OBDSTAR C4-07(MB-VGS4-0-NAG2) Adapter Kit can be used to work with X300 Classic G3 (Key Master G3) and DC706 ECU Tool, etc for all Mercedes-Benz FBS4/DAS4 generation with VGS4-0 NAG2 7G-Tronic TCU. It supports solder-free virginizing of used TCM via JTAG mode and personalization (Data transfer) via BENCH or OBD mode, achieving the same effect as TCM clone.

OBDSTAR C4-07(MB-VGS4-0-NAG2) Adapter Kit has two kinds of versions.

Full Configuration and Simple Version

Both versions contain the following accessories:

• C4-07-01 Soldering-freeboard

For MB- VGS4-0-NAG2 TCM Read/Write data via JTAG mode

• C4-07-02 Custom positioning board

For accurately positioning TCM hole-drilling position

• W011Connecting Cable
• W020-V1.1Interface Board
• 22mm Custom drill head

For TCM drilling with electric drill

Total price: $126

OBDSTAR C4-07Adapter Kit Full version adds TCM-012 ($15) and Converter V2 ($8) for Bench mode data reading and writing. If you already have these two accessories, you can buy the simple version.

Note:

1. Need to be used with OBDSTAR MP001 multifunctional programmer.

2. All of the above accessories are required to perform the function.

OBDSTAR C4-07Adapter Kit Highlights:

• Custom positioning board for precise drilling and secure drilling access to the control unit;
• Used together with the custom drill head and a handled drill, the TCM can be easily opened with minimal exterior damage;
• High-precision custom board enabling safe, solder-free read/write operations-ensuring reliable data access and operational safety

OBDSTAR C4-07(MB-VGS4-0-NAG2) Adapter Kit will be available at the end of August or the beginning of September.