BMW DME Bench Unlock Software for GEN1 GEN2 S55 S58 B46 B48 B58 F & G Series and Toyota Supra A90 for foxflash, padflash,Kt200 User

BMW DME Bench Unlock Software for GEN1 GEN2 S55 S58 B46 B48 B58 F & G Series and Toyota Supra A90 for foxflash, padflash,Kt200 User

Software will complement any Any tool capable of Full bench read on MG1/MEV17, for example Foxflash, KT200, Padflash, ECU bench tool 

BMW DME Bench Unlock Software for GEN1 GEN2 S55 S58 B46 B48 B58 F & G Series and Toyota Supra.
Suitable for DME's (Dealer Patch Locked or 06/2019-05/2020)
Note DME's after 2020 cannot be unlocked and require the ECU going to FEMTO for a hardware unlock.

BMW (and Toyota, for the Supra A90 owners) F/G series may have their ECU's locked from the factory or via updates 
which prevents them being tuned via the OBD port. 
Many of these cars are tuned Via OBD with Software like Bootmod3 or MHD. So in Order to use OBD tuning software the 
ECU needs to be unlocked.

This software will allow you as a tuner to offer this service which companys charge around 200euro per DME unlock.
The procedure requires a full Bench read from your tool, load the Irom into the Software, perform the
unlock Patch and Write the file back to the ECU.
The Unlock is Applicable to many cars such as Supra A90, BMS M340I M2 M3 M4 F80 F82 F83 F87 F90 M5

V2 updates :
You can also open an MG1 eprom, and the App will attempt to decipher the ISN numbers for
the DME and EGS. The function will provide hex addresses to Check in a hex editor to confirm these are correct.
This function is very helpfully when security ISN keys are needs for coding new modules or keys for example.

*******Free software is Supplied to allow flashing via obd with a simple cheap D-KCAN interface ****
These ECUs are fully supported for direct flashing  via OBD-II. 
N54 (MSD80/MSD81) N55 (MEVD17.2.x) N52 (MSV70/MSV80)
Bench Unlock patch Required to flash the below via OBD
B58 (MG1 S55 (MEVD17.2.x) B48 (MG1) S58 (MG1)
Ideal method allowing you to remote tune customers cars after returning an unlocked ECU to them.

Future updates :- VMAX, CAT, OPC etc etc

System requirements
Windows 10 or Windows 11 x64, 4MB, I3 processor or better. online connection for Licence check.
Software Licence is locked to one PC and is non transferable.
Lifetime updates free.
Licence cost is Per PC

Notice:
Software will not run on a machine with any vm installed, or vm environment enabled.